Cryptech, theme documentation

First, thank you for purchasing our theme!

This guide provides instructions for installation, help on getting started and extensive documentation of features. It is recommended you read it thoroughly to fully leverage the Cryptech theme's capabilities. Please also make sure to check out our Video Tutorials as they explain everything covered in here in greater depth. We hope you enjoy building with Cryptech as much as we enjoyed developing it and continue to develop with new features!

Server requirements is one of the key factors for WordPress and Cryptech theme, it is highly recommended to use a server which supports the following requirements. We explain about WordPress, Cryptech, WooCommerce server requirements.

WordPress requirements

WordPress recommends following server settings.

Cryptech requirements

We recommends following server settings for Our WordPress Theme:

WooCommerce requirements

Cryptech support WooCommerce officially so it is best to make sure your server also supports this plugin requirements if you are going to set up a shop.To learn about the plugin server requirements, read the official article.

Before beginning the installation and configuring of your new theme, you must first have WordPress already installed on a server.

If you are struggling, here is a very detailed guide at Wordpress Codex that will walk you through every step.

Once you have setup a copy of WordPress, there are two ways you can go about installing the theme:

• 1. FTP Upload

• Unzip the download and upload the theme directory /Cryptech/ into your WordPress themes directory /wp-content/themes/.

• 2. WordPress Upload

This is definitely the easier route for most. Simply navigate to Appearance > Themes > Add New > Upload Theme. Click the 'browse' button and locate the still zipped theme folder. The theme will be uploaded and installed in a matter of seconds.

After you have installed the theme successfully, you can optionally import the supplied dummy data in order to get a feel for things. If you're interested in importing the data, please check the Demo Data section below

Once you have installed and activated our theme you will be prompted to install required and recommended plugins. Just click the link to Begin installing plugins.

Next, check boxes to select all the plugins you want to install, select the bulk action of install from the dropdown box and then click the button to apply.

Next, just click the link to Return to Required Plugins Installer.

Select the plugins you had installed, and then apply the bulk action to activate them.

Finally, you will got a confirmation notice that your plugins were activated.

There are two methods you can use, one is using our One-click Importer, the other is Importing manually. To go with the former option, please follow the steps below:

1. 1. Go to Cryptech click Import Demo.

2. 

3. 2. Just click Import Demo and wait for the process to complete.

4. 

5. After importation is finished, you are done.

• Step-1 : Import XML

  To import demo content by yourself, please follow some steps below:

  You need to extra theme package file. And then:

  • 1. Go to Tools > Import.

  • 

  • 

  • 

  2. You need upload two files on the path below:

  • - cryptech > inc > demo-data > cryptech > content > attachment-data.xml
  • - cryptech > inc > demo-data > cryptech > content > content-data.xml
  • 

  • 

• Step-2 : Import Options

  1. On Cryptech tab, click Theme Options > Import/Export

  

  

  2. Click Import from File

  

  3. Open file options.json on the the path: cryptech> inc > demo-data > cryptech > options.json .

  4. Copy all content of options.json file and then paste it into text area.

  

• Step-3 : Import Setting

  1. On Cryptech tab, click Theme Options > Import/Export

  

  

  2. Click Import from File

  

  3. Open file setting.json on the the path: cryptech> inc > demo-data > cryptech > setting.json .

  4. Copy all content of setting.json file and then paste it into text area.

  

• Step-4 : Import widgets

  1. Install Widget Importer & Exporter plugin.

  2. Go to Widget Importer & Exporter on the Tools menu

  
  

  

  3. Click Browse.. button and upload file widgets.wie on the path cryptech> inc > demo-data > cryptech > widgets.wie .






• Step-5 : Import Slider

  • 1. Go to Slider Revolution.
  • 
  • 2. Import slider.
  • 
  • 3. You upload slider on the path cryptech> inc > demo-data > cryptech > revslider > homepage1.zip. You need upload all sliders on here.
  • 

After all finished, you will have the perfect website like our demo.

After installation, you will be suggested to install additional plugins. To install them and activate, please navigate to Plugins, you will see a list of required and optional plugins. We recommend that you install the following to get the best of our theme:

WPBakery Page Builder is the most popular drag and drop editor for wordpress.

If you need dedicated support for this component, please visit: WPBakery Page Builder

This plugin patches (as long as it is active) the existent vulnerabilities in Revolution Slider plugin, including the latest SoakSoak (Arbitrary File Upload) vulnerability.

You can also monitor using the “Black list” option all the attackers that attempt to use a Revolution Slider exploit to gain access to your website.

For detailed inforamtion and support on this plugin, please go to: Revolution Slider

WooCommerce is a free eCommerce plugin that allows you to sell anything, beautifully. Built to integrate seamlessly with WordPress, WooCommerce is the world’s favorite eCommerce solution that gives both store owners and developers complete control.

If you need dedicated support for this plugin, please visit: WooCommerce

Newsletter is a real newsletter system for your WordPress blog: perfect for list building, you can easily create, send and track e-mails, headache-free.

It just works out of box!

For detailed inforamtion and support on this plugin, please go to: Newsletter

Contact Form 7 is one of the most popular form builders for wordpress.

We have created styles ready for you to use within your Cryptech theme.

For detailed inforamtion and support on this plugin, please go to: Contact Form 7

You will see notice about update plugin like:

We can't give you 1 license key to active auto plugin WPBakery Page Builder and Revolution Slider.

Because you can read about the differences between the extended and regular licence. We are permitted to give you the purchase code of the plugins because of policy and terms of Theme Forest. We always update the plugins via theme updates and you will receive the latest version of this plugins via email.

If you want plugin auto update please buy regular license in WPBakery Page Builder and Revolution Slider

1. 1. From the 'Appearance' menu on the left-hand side of the Dashboard, select the 'Menus' option to bring up the Menu Editor.



2. 2. Select create a new menu at the top of the page



3. 3. Enter a name for your new menu in the Menu Name box.
4. 4. Click the Create Menu button. 



5. 5. Click Select to select menu created.

Your new custom menu has been defined.

You can add different link types into your menu, these are split between panes left of the menu you're currently editing.

1. 1. Locate the pane entitled Pages.
2. 2. Within this pane, select the View All link to bring up a list of all the currently published Pages on your site.
3. 3. Select the Pages that you want to add by clicking the checkbox next to each Page's title.
4. 4. Click the Add to Menu button located at the bottom of this pane to add your selection(s) to the menu that you created in the previous step.



5. 5. Click the Save Menu button once you've added all the menu items you want.

Your custom menu has now been saved.

When planning the structure of your menu, it helps to think of each menu item as a heading in a formal report document. In a formal report, main section headings (Level 1 headings) are the nearest to the left of the page; sub-section headings (Level 2 headings) are indented slightly further to the right; any other subordinate headings (Level 3, 4, etc) within the same section are indented even further to the right.

The WordPress menu editor allows you to create multi-level menus using a simple 'drag and drop' interface. Drag menu items up or down to change their order of appearance in the menu. Drag menu items left or right in order to create sub-levels within your menu.

To make one menu item a subordinate of another, you need to position the 'child' underneath its 'parent' and then drag it slightly to the right.

1. 1. Position the mouse over the 'child' menu item.
2. 2. Whilst holding the left mouse button, drag it to the right.
3. 3. Release the mouse button.
4. 4. Repeat these steps for each sub-menu item.



5. 5. Click the Save Menu  button in the Menu Editor to save your changes.

1. 1. Scroll to the bottom of the menu editor window.
2. 2. In the section titled Theme locations, click the check box for the location where you want your menu to appear.



3. 3. Click Save menu once you've made your selection.

Congratulations! Your menu has now been added to your site.

You can set any menu as Primary menu here.

Note: If you perform custom in Page option, your page will run with this set up and all set up in Theme option will be invalid. If you don't perform custom any things, your site will run with all option in Theme option.

I. Header





Result:



II. Page Title



Result:



III. Content



Result:



IV. Footer



Result:

To set a page as Home page, go to Settings > Reading in your WordPress Dashboard panel.

1. 1. Set "Front page displays" as "A Static Page"
2. 2. In the drop down menu for "Front Page" choose a page which will be your home page.



3. 3. Save changes.

To Add Widget on Sidebar, please following these steps:

1. 1. Navigate to Appearance>Widgets to access the list of widgets and widget section that they can be added. The left hand side show all widgets you can use. The right hand side shows all different section you can add widgets to.
2. 2. Simply drag and drop the widget you want into the widgets section you want to the right hand side.
3. 3. When you finished, you can visit the site to see results.

The options panel is home to all of the theme's extensive configuration options. To view the panel, click on Theme Options in the left-hand menu. Here you have the ability to alter many core aspects that make up how your theme looks and behaves. Any of the options that have some ambiguity to them conviently have descriptions to explain their purpose.

Result :

Result :

Result:

Result:

Result:

• 

  Result:

  

Result:

Result:

Result:

Result:

If you want to config number of product column, should follow some steps below:

Result:

Result:

Result:

Result:

Result:

Result:

Result:

Result:

On this section, Cryptech theme had some available fonts for you. If you want to set a special font for a special class, you only need to insert your class into Selector section, and choose the font that you want on the Font dropdown box. Finally, you click Save changes and see your result, all completed.

Example:

1. Copy class that you want to change.

2. Select Font Family, Font Weight & Style and paste class on Selector section.

Result:

Result:

Result:

Result:

Enter URL for social media.

This section is especially for all those who want to move settings from theme options panel between themes or when you move your website from test server to live. Please always remember to click "Save Changes" button. Without that you will lose all your changes.

Visual Composer is a powerful Wordpress page builder that allows you to create complex page layouts without touching a single line of code. To switch to Visual Composer's Backend Editor, click on this button:

When Visual Composer's editing pane comes up, click on either of these buttons to Add Element.

A shortcode selecting panel will show up, you can see all the shortcode available in the theme. Select the one you would like to use.

You will then encounter a setting panel for the shortcode (each shortcode has it own setting options), after a bit of configuration, it will show up nicely on your page.

Result :

Result :

Result :

Result :

Result :

Result :

Result :

Result :

Result :

Result :

Result :

Result :

Result :

Result :

To translation the theme, i suggest you using Loco plugin. This plugin can help you do all things easy.

Please read guide document for detail here: Loco Translate

Or, follow me:

Translate Theme – in cases, you need to change default texts of Our themes in your website front end. This theme is built our way that you can translate it with ease. We have already added default “.pot” WordPress language files and you can start WordPress theme translation from there.

Translate Theme – PO/MO files

WordPress uses 2 file  pair  with PO and MO extensions to understand where to put alternative texts inside code. PO file is a Key/Value pair file which will be used to add translations of specific phrases. MO file is compiled version of PO file which WordPress understands.

Our themes also have their own PO/MO file pair that you can use to translate different parts of the theme. Those files are located in wp-content/themes/theme name/languages folder.

How to edit PO files and Compile MO file out of it

You will need a software called POEDIT to edit PO files and add your translations inside that and generate MO file out of it. It is free, works on Mac, Windows and Linux, easy use and there is no reason not to use it.

For more information please read this article in details:

Steps to Translate theme:

1. Set Default Language.  

Go to Settings > General > Site Language and set it to your desired language.

2. Install the Child Theme.  

Install the Child Theme so that your translation will be safe upon updating core theme.

3. Copy Languages Folder.  

Go to wp-content/themes/theme name/languages  and copy folder and paste it into your child theme wp-content/themes/theme name-child

So that you will have a folder on your child theme called languages:

You will see  file there that you can use for translation (theme name.pot). Please consider that the name of these  files should be the same as your default language code which you have set in wp-config.php file explained at the beginning of tutorial.

4. Use Loco Translate.  

The Loco Translate is a third party plugin which makes it possible to edit the PO files and compile them to MO files directly from the WordPress Admin section.

5. Alternatively Use POEDIT.  

If for any reason you can not use the Loco Translate plugin, you can use POEDIT software to do your translation and generate MO files alternatively. For more detailed information on how to use POEDIT

5.1. You need download POEdit from: https://poedit.net/

5.2. Second thing is to open default language files form your theme. in normal our theme, it is located in languages folder inside theme folder. You should use this default file for translation but you need to create a new file when you are done. Most themes has the same structure and language files should be somewhere inside theme folder. There is chance that your theme is not ready for translation so it might take time to modify.

5.3. Now in the Poedit click on original text one by one and write your translation underneath. Just like you can see iu the screenshot below. It will take some time to get through all of them so be patient.

If you think that some translations you won’t need you can leave them as they are in the original language.

5.4. Now the most important part: When you are saving your file in theme language folder you should use proper language code.
For instance if you have translated WordPress theme to German you shoulduse “de_DE.po” as file name and “fr_FR.po” for French. This will make sure that WordPress understands what language you are referring to.

Please note: Default language file extension is .pot (such as organic.pot... ) but you have to use .po in order to make your translation work. Also Poedit application will create .mo and it needs to be included in languages folder as well.

5.5. Now WordPress will use theme language the same as your WordPress language. If your WordPress dashboard uses French, don’t expect for theme to show German. Changing WordPress language will automatically
change theme language if it is available in the theme language folder under proper name we discussed in Step 4.

5.6. Changing WordPress language is as easy as adding

					define ('WPLANG', 'fr_FR');

to the wp-config.php file located at your WordPress installation root folder.

Beware! You need to activate your child theme from Appearance menu to see translation working.

Beware! You will need to clear cache to see the translation.

Setting Default Language of WordPress

Since the introduction of WordPress version 4, there is a new option in general settings section which you can use to select your installation default language. Go to Settings > General > Default Language to see the option.

Thank you!

Our themes are optimized by with H1, H2, H3, H4, H5 tags, clean code, HTML5 but if you want to get higher ranking on search engines, you must need some help from SEO plugins and Google Pagespeed Service:

• Yoast SEO plugin
• Google Pagespeed Service
• Smush.it ( Optimizing Images )
• SEO Friendly Images ( SEO Images )

NOTICE: YOU MUST BE BACKUP YOUR DATA BEFORE UPDATE THE THEME.

You can update our theme using some ways bellow:

1. Update theme using Envato WordPress Toolkit.
or
2. You can update manual theme:

- If you have any troubles while using auto update ( such as permissions issue ) , and you want to update manually the theme via FTP or Cpanel.

- You download latest version of the theme on ThemeForest download page, and you rename the folder contain the old theme, then create a new folder and insert the latest theme into it.

The team at 7oroof are always Cryptech to help you with any questions or recommendations you have about the Cryptech theme. If you need any help or support please contact us through the TF Messaging system or
direct at Email: [email protected]
direct at Forum: https://7oroof.com/support/